What Goes Into Illinois's NOx RACT Compliance Certification — and What a Plant Can Automate
Chicago's move to a Serious ozone area lowered Illinois's NOx threshold and pulled more plants into Part 217. The yearly compliance certification is one signature, but the evidence behind it — twelve months of 30-day rolling NOx data, operating hours and deviations per unit — is where the work is. A worked example and a clear split of what to automate.
In this guide
If your plant runs boilers, process heaters, furnaces, kilns or large engines in the Chicago area, Illinois's 2025 NOx RACT changes likely added one firm yearly task: an annual compliance certification, due every May 1, that a responsible official signs for each affected unit. The signature is the easy part. The work is assembling twelve months of evidence behind it — a monthly highest 30-day rolling average emission rate for each unit, operating hours, monitor uptime and any deviations — and having a person stand behind what that evidence says. This article explains what the certification asks for, walks through one unit for one year, and marks a clear line between what software can assemble and what a person still has to own.
Chicago is a Serious ozone area now, and that pulled more plants in
The reason more Illinois plants owe this certification is a classification change, not a new form. Effective January 16, 2025, EPA reclassified the Chicago, IL-IN-WI area from Moderate to Serious nonattainment for the 2015 ozone standard, with an attainment deadline of August 3, 2027. A Serious classification lowers the Clean Air Act's "major source" line for nitrogen oxides from 100 tons per year of potential emissions to 50. Illinois responded by amending its NOx Reasonably Available Control Technology rules in 35 Ill. Adm. Code Part 217, which the Illinois Pollution Control Board adopted on April 17, 2025 in docket R25-17.
Under the amended rule, Part 217 reaches listed unit types that emit at least 15 tons per year of NOx at sources whose potential to emit is at least 50 tons per year, within the Chicago and Metro-East areas. The listed units cover a lot of manufacturing: industrial boilers, process heaters, glass melting furnaces, cement and lime kilns, iron, steel and aluminum production, and stationary engines and turbines. EPA's own review of the state rule is still in progress — its August 2026 action proposing to approve Part 217 as meeting Moderate and Serious NOx RACT is a proposed rule, not a final approval, and it notes that emissions averaging is voluntary but adds a 10 percent reduction for units in an averaging plan. The practical point for an operator: if a unit was ever subject, Illinois's "once in, always in" approach keeps it subject, so the certification is a recurring obligation, not a one-time filing.
Decide which compliance work is worth automating before you build anything.
What the compliance certification actually asks for
The certification is a per-unit statement, due by May 1 for the prior calendar year, that each affected unit met its limit or that it did not and by how much. According to a regulatory analysis of the rule by Trinity Consultants, the annual compliance certification under 35 IAC 217.156(m) and 217.396(d) identifies each unit and its location, describes the compliance method and any averaging plan, and for each calendar month reports the highest 30-day rolling average emission rate in the units of the limit, along with daily and total operating hours, capacity utilization, and the percent of time a continuous emissions monitoring system (CEMS) or predictive system (PEMS) was operating while the unit ran. A responsible official then certifies compliance, naming any periods of noncompliance with the excess emissions quantified.
Two timing details matter. The certification covers the prior calendar year, so the May 1, 2027 filing is the first to cover a full year (January 1 through December 31, 2026). And you do not file it in isolation: operators may submit it with the Annual Emissions Report required under 35 IAC Part 254, and Trinity recommends that facilities holding a Clean Air Act Permit Program (Title V/CAAPP) permit fold it into their existing annual compliance certification rather than treating it as a separate letter. If you run an averaging plan, a second report is due the same day showing, on a 30-day rolling basis, that actual NOx mass stayed below the allowable mass for the units in the plan.
One unit, twelve months: how the evidence is assembled
This is an illustrative example, not a specific facility. Suppose a Cook County metal-products plant runs one natural-gas process heater subject to a Part 217 limit, and its permit expresses that limit as a 30-day rolling average in pounds of NOx per million Btu. For the May 1 certification, the plant has to produce, for each of the twelve months, the single highest 30-day rolling average the heater reached that month, the hours it ran, how hard it ran, and how much of that run time the monitor was actually recording.
The raw material already exists in the plant historian: daily NOx values from the CEMS, fuel-flow and firing-rate data, and maintenance work orders. Turning it into the certification means, for every day, computing the trailing 30-day average, finding each month's peak of that rolling figure, and checking it against the limit. Say the heater sat comfortably under the limit for ten months, the monitor went down for a controller swap in August so three days need a documented substitute data method, and a tuning problem in October pushed two days' rolling average above the limit before it was corrected. Those two outcomes are not the same: the August gap is a data-availability question, and the October exceedance is a potential deviation that has to be quantified and explained. A spreadsheet can surface both; only a person can decide which is which and write the cause.
What to automate, configure, or keep with a person
The honest split here is that assembly is automatable and judgment is not. Software earns its place pulling and computing the numbers; a person earns the paycheck deciding what the numbers mean and signing the result.
| Certification requirement | Where the data lives | What software can do | What a person still owns |
|---|---|---|---|
| Monthly highest 30-day rolling average emission rate, per unit | CEMS/PEMS historian, data acquisition system | Compute trailing 30-day averages daily, pick each month's peak, flag any value at or above the limit | Confirm the monitor was in control; approve any substitute data; judge whether a flagged value is a real deviation |
| Operating hours, capacity utilization, monitor uptime | Plant historian, maintenance and downtime logs | Total hours, compute percent monitor availability, build the monthly table | Reconcile against maintenance records and explain gaps |
| Deviations and excess emissions | CEMS alarms, shift logs, work orders | Surface candidate deviation periods and quantify the excess | Decide what is a reportable deviation versus a monitor artifact, and write the cause |
| Compliance-method and certification text | Title V permit, prior year's filing | Draft from the permit and last year's certification | Verify it matches the current permit; the responsible official certifies it |
| Averaging-plan calculations, if used | Monitoring data plus plan limits | Compute 30-day rolling allowable versus actual mass for each unit in the plan | Confirm the plan's unit list and that actual stayed below allowable |
This split is our recommended method, not a guaranteed result; the right boundary depends on how your monitoring data is stored and how your permit is written. For many plants the first useful step is not buying software at all but connecting the historian to a single reviewed workbook, so the 30-day math is computed once and checked, rather than rebuilt by hand each April.
Where this goes wrong
The failure mode is treating a faster pile of data as a finished certification. A list of flagged exceedances is not resolved work until someone is assigned to each one, decides whether it is a deviation, and documents the cause before May 1 — and that person has to exist and have time in April, not just a queue that fills up. Two other traps are common. Substitute data for monitor downtime is a judgment with its own rules; automating the gap-fill without a reviewer invites a filing that is precise and wrong. And the certification is a legal attestation by a responsible official, so the goal of automation is a clean, well-evidenced draft a person can stand behind, never a signature a system applies on its own. Finally, this article cannot tell you whether a specific unit is subject or which subpart applies; applicability turns on your units, your location and your permit, and that determination belongs with your environmental staff or counsel reading the rule.
Quick answers
When is the Illinois NOx RACT compliance certification due?
By May 1 each year, covering the prior calendar year. Operators may submit it with the Annual Emissions Report under 35 IAC Part 254, and Title V (CAAPP) facilities can fold it into their existing annual compliance certification.
Why do more Chicago-area plants have to certify now?
EPA reclassified the Chicago, IL-IN-WI area to Serious nonattainment for the 2015 ozone standard effective January 16, 2025, which lowered the NOx major-source threshold to 50 tons per year. Illinois's amended Part 217 reaches listed units emitting at least 15 tons per year of NOx at sources with potential to emit of at least 50.
Can software sign the certification?
No. Software can assemble the 30-day rolling data, operating hours and deviations and draft the report, but a responsible official certifies it. A knowingly false certification carries legal consequences.
Does automating this make my facility compliant?
No. It organizes the evidence and makes the annual filing faster and more defensible. Actual compliance depends on the units meeting their limits and a person owning the deviation and data-substitution calls.
Sources
- January 16, 2025, EPA reclassified the Chicago, IL-IN-WI area from Moderate to Serious · govinfo.gov
- Illinois Pollution Control Board adopted on April 17, 2025 · pcb.illinois.gov
- August 2026 action proposing to approve Part 217 · govinfo.gov
- a regulatory analysis of the rule by Trinity Consultants · trinityconsultants.com
How we research and review these guides
Put the ideas to work in your business.
We provide AI consulting and implementation. Bring us the process that is slowing your team down and the systems involved. We can assess the problem with you and discuss a practical implementation.
Discuss your project →Still exploring? Explore the Workflow Opportunity Workbook →